Geicos blog

Reading time: 8 MINUTES

Optimizing Industrial Bearing Cleaning in the Czech Republic

Written by Geicos Group
on 16 November, 2026

How custom engineering a dual-tank Washer 1150 E POWER eliminated in-process cleaning bottlenecks for an industrial maintenance provider.

Project Fact Sheet
Location Brno, Czech Republic
Industry Industrial maintenance, workshops, and heavy-duty repair
Core Business Sales and service leasing of professional cleaning equipment and specialized detergents
Treated Components Medium-to-large industrial bearings

Objective: Standardizing Critical In-Process Cleaning

In the client’s overhaul and manufacturing workflow, industrial bearing washing serves as a critical intermediate stage prior to downstream assembly. The standard procedure faced three strict constraints:

01

Preventing Chemical Residues on Parts

Initial degreasing with a water-based solution required an immediate, thorough rinse. The detergent surfactants—vital for stripping oils and heavy contaminants—could not be allowed to linger on the metal before downstream processing.

02

Eliminating Line-Operator Error

The client required an intuitive, foolproof ("user-friendly") setup. The goal was to remove operator discretion over cycle times and temperatures by locking in wash parameters upfront, reducing manual intervention to loading and hitting start.

03

Handling Heavy Workpieces Unobstructed

The medium-to-large dimensions of the bearings required top-loading via a jib crane or overhead hoist, which conflicted with the internal clearances of standard parts washers.

Solution: From Field Testing to a Custom Dual-Tank System

The project was developed in close collaboration with the local distributor. The initial phase involved deploying a standard machine (Washer 1150) on-site to conduct empirical cycle-time testing and benchmark the ideal water-based degreasing chemistry.

Having mapped the operational bottlenecks on the floor, the Geicos engineering team re-engineered the Washer 1150 E POWER (P40009.1) into a custom two-stage platform:

✓
Dual independent tank configuration: Integration of two separate reservoirs equipped with dual high-flow, high-pressure pumps and distinct spray manifolds (one for heated alkaline degreasing, one for clean water rinsing).
✓
Automated fluid routing: To prevent rinse water from contaminating the detergent bath (and vice versa), airtight diverter solenoid valves were integrated to direct returning run-off to their respective tanks. The unit was also plumbed directly to the water mains for automated filling and drainage.
✓
Hoist-loading layout: Internal spray bars were dimensionally reconfigured to open up the top loading envelope, allowing effortless vertical loading of heavy parts via crane or hoist.
✓
Tamper-proof digital control panel: The interface was upgraded with programmable digital temperature controllers and timers. Shop supervisors pre-set and lock cycle durations and thermal profiles; line operators only interact with a streamlined "Start & Stop" control.

Operational Results and Business Impact

Deploying the customized Washer 1150 eliminated critical maintenance bay inefficiencies:

Standardized Cycle and Zero Chemical Carryover

Automating the wash, rinse, and dry sequence delivers spot-free bearings free of surfactant residues, ready for immediate assembly.

Zero Operator Attendance During Washing

Manual bench adjustments were eliminated entirely: operators load the workpiece, press start, and attend to higher-value tasks while the cycle runs autonomously.

Extended Chemical Bath Life

Hydraulic separation via dedicated solenoid valves prevents cross-contamination, substantially reducing chemical consumption and fluid disposal frequency.

Fleet Scalability

Validating this configuration enabled the client to expand their rental fleet capacity and bid on demanding maintenance contracts, including public rail and transit infrastructure.

Looking to standardize your in-process parts washing or need a custom setup for heavy workpieces?

Contact Geicos Technical Engineering for an on-site application review.